Pimax recently revealed a new high-end VR kit, along with their own version of a Steam Machine, and they plan better Linux support overall.
In an email to GamingOnLinux, they said "Hi Liam, Pimax Play is coming to Linux as a dedicated client and it is being developed now". What is Pimax Play? That's their dedicated software client that powers all the Pimax VR headsets. So eventually they will be plug and play on your favourite Linux distribution.
During a recent event they announced the new Pimax Crystal Pro, their new high-end kit with "Native Foveated Streaming".

Some key specifications they sent over to GamingOnLinux:
- Wireless (included): Built-in Wi-Fi streaming plus a dedicated Wi-Fi 6E adapter, both in the box.
- 60G AirLink (optional upgrade): The third-generation kit includes two headset antennas, two Room Antennas, and two USB-C cables. The Room Antennas work in a 2x2 MIMO configuration; Pimax states this is the first 60GHz 2x2 MIMO wireless link on a VR headset. The two antennas back each other up if one is briefly blocked, and split the data stream for more bandwidth than a single-antenna system. Combined throughput is up to 6 Gbps, delivering an image equivalent to 2880 x 2880 pixels per eye in the user's focus area, without video encoding. Pimax states added latency from the kit is under 2 milliseconds. As with other 60GHz wireless systems, the signal does not pass through walls.
- Optics and display: Aspheric glass lenses paired with quantum-dot LCD (QLED) display panels at 2880 x 2880 pixels per eye (~17 million pixels total), a 110° horizontal field of view, 35 pixels per degree, refresh rates of 72/90/120Hz, Mini-LED local dimming with 576 zones per eye, and 200 nits of brightness.
- Eye-tracking: Integrated Omnivision eye-tracking with ten infrared emitters per eye, sampling at 120Hz, used for both dynamic foveated rendering and, with the 60G AirLink kit installed, foveated streaming.
- Tracking: Pimax SLAM 2.0 inside-out tracking, combining four cameras, a motion sensor, and infrared illumination for low-light tracking. A swappable faceplate adds optional Lighthouse base-station support; an optional MR faceplate adds full-color passthrough with LiDAR depth sensing.
- Power and connectivity: No battery is built into the headset; power is supplied by the included 16,000mAh external battery pack. An optional DisplayPort 1.4a cable connection is also available for wired PC VR use.
- Comfort: A rigid backstrap design, a magnetically attached facemask and foam interface, adjustable eye relief, three remappable buttons, three microphones, and off-ear speakers, with optional DMAS 2.0 earphones.
- Modularity: Swappable faceplate, backstrap, audio components, and lens inserts.
No shipping dates were said but they did give pricing:
- Pimax Crystal Pro: $1,399 USD.
- Pimax Crystal Pro with 60G AirLink (third generation): $1,899 USD.
- 60G AirLink kit (third generation), sold separately: $599 USD.
Additionally they announced the Pimax Spation, their own version of a Steam Machine, which they said will support both Windows and SteamOS.

More info - it's using desktop-class CPU and GPU components, in a chassis smaller than a typical tower PC. The standard configuration pairs an AMD Ryzen 7 9800X3D CPU (or equivalent) with an AMD RX 9070 XT or Nvidia RTX 5070 Ti GPU, 32GB of DDR5-6000 memory and a 1TB M.2 NVMe SSD, powered by a 1000W SFX power supply. A DIY option is also planned to let you bring your own storage memory and GPU.
Connectivity includes Wi-Fi 7, Bluetooth 5.4 and 2.5G Ethernet. Display outputs are two DisplayPort 2.1, one HDMI 2.1 and one USB-C DisplayPort 1.4a, alongside one USB4 port and six USB 3.2 Gen 2 ports.
A price or release date weren't mentioned.
My aging 2080 Ti is already struggling with the Frame resolution. The beast of a GPU you're going to need to get the best out of this hardware is going to be insane. I'm not sure even a 9070XT is going to be enough.
Secondly, all that data needs to be streamed as well. And I still haven't figured out how to make Frame levels of data stream reliably.
So yeah, sounds nice, but not sure if it can actually provide its value on normal hardware.
Mini-LED local dimming with 576 zones per eyeThis is interesting, I don't think that the Frame has mini LED backlight. It sounds like an obvious improvement in retrospect (short of micro LED).
A swappable faceplate adds optional Lighthouse base-station supportThis also sounds interesting, I hope a backplate like that will appear for the Frame.
Specs-wise, this sounds great (and yeah, a lot of pixels to drive!).
I'm more worried about long term support. Seeing some commitment towards Linux-based solution is good; I had to ditch the perfectly fine VR setup I had because there is absolutely no way to make it work outside of Windows (thanks HTC…).
I mean sure that sounds good, but compared to a Steam Machine it's going to be larger, draw a ton of power, and probably start for well over $2,000 with the screwed up market right now.
Even if they can put it in a slick package you can't easily DIY, who's going to actually buy that rather than building? They'll need a very small section of an already small venn diagram to get the people who will spend that much money, but also not be the kind of enthusiasts to just build a small computer.
Quoting: Cley_FayeI'm more worried about long term support. Seeing some commitment towards Linux-based solution is good; I had to ditch the perfectly fine VR setup I had because there is absolutely no way to make it work outside of Windows (thanks HTC…).Yes, and I see about one company I trust in to do that well...
i'm glad anytime a company shows a sign that linux is on its map, and it sure looks like Valve suceeded in increasing how many other companies care about supporting it, both for software and for hardware
Last edited by Marlock on 13 Oct 2026 at 2:18 pm UTC
Quoting: Marlockqled sure is an improvement against common led backlight for LCD displays, but is there a technical advantage to it over using OLED in VR?It is said they aren't bright enough to be used with pancake lenses. And without those you need to use fresnel lenses, which give substantial light scatter (as can be seen in the Index). So it's a choice between superior clarity or superior contrast.
Quoting: EhvisIt all sounds very good on paper. But here's the problem. When I got my Frame I was struggling to make it run smoothly compared to my Index. The simple problem was that even though the resolution of the Frame looks like a minor upgrade over the Index, it still meant doubling the number of pixels. This thing adds another 80% in pixels on top of the Frame, giving you a nice 3.6 times the number of pixels to the Index. Because of the distortion applied to the rendered image in order to make it presentable through the lenses, you'd ideally need another 30% increase in resolution. If you don't, you get the VR equivalent of aliasing problems. Apply all that and this piece of hardware requires you to render 3.4 4k @ 120 fps screens to actually get the best out of it!Even for non-VR games, most modern GPUs are relying heavily on upscaling. Unless game developers keep their graphics simple, don't expect to see much native rendering nowadays.
My aging 2080 Ti is already struggling with the Frame resolution. The beast of a GPU you're going to need to get the best out of this hardware is going to be insane. I'm not sure even a 9070XT is going to be enough.
Secondly, all that data needs to be streamed as well. And I still haven't figured out how to make Frame levels of data stream reliably.
So yeah, sounds nice, but not sure if it can actually provide its value on normal hardware.
Couple that with rising GPU prices, and welcome to the future.



