Every article tag can be clicked to get a list of all articles in that category. Every article tag also has an RSS feed! You can customize an RSS feed too!
We do often include affiliate links to earn us some pennies. See more here.

The last few years have shown what competition can really do. AMD went from being constantly bottom, to truly kicking some ass with the Zen processor design and they have more to come.

In a new press release covering AMD's Financial Analyst Day, AMD talked about some of their upcoming hardware plans and it's really getting exciting if you're an enthusiast. AMD claims they have now shipped "more than" 260 million of their Zen core procressors across Ryzen and EPYC.

To keep the momentum going, they've updated their roadmap of what's to come. They're going to be introducing another next-generation with Zen 3 later this year. On top of that, Zen 4 is also in the design phase and it should be using the 5nm process, which should bring some more impressive improvements once again. This is while Intel has admitted it's struggling to keep up right now, although they think they will regain some of this when they go to 7nm themselves in 2021.

On top of that, AMD also announced their newer GPU architecture with AMD RDNA will also see a next-generation AMD RDNA 2 which should become available later this year as well. AMD say this will give a "50% performance-per-watt improvement over the first-generation AMD RDNA architecture" and it will also support "hardware-accelerated ray tracing, variable rate shading (VRS) and other advanced features".

Part of all this advancement is their change in how they design the hardware. They said they're expanding upon the chiplet and die stacking, with a new "X3D" packing form that "combines chiplets and hybrid 2.5D and 3D die stacking to deliver more than a 10x increase in bandwidth density".

So late this year we can expect Zen 3 to come to AMD CPUs and AMD RDNA 2-based "Navi 2X" GPUs with AMD getting in the ray tracing game.

A lot to look forward to if you're going to be upgrading your gaming rig.

Article taken from GamingOnLinux.com.
Tags: AMD, Hardware
23 Likes
About the author -
author picture
I am the owner of GamingOnLinux. After discovering Linux back in the days of Mandrake in 2003, I constantly came back to check on the progress of Linux until Ubuntu appeared on the scene and it helped me to really love it. You can reach me easily by emailing GamingOnLinux directly. Find me on Mastodon.
See more from me
The comments on this article are closed.
19 comments
Page: «2/2
  Go to:

Whitewolfe80 Mar 8, 2020
While everyone will be looking at the high end stuff personally cant wait to see navi based apus love the Athlon and ryzen apus they work perfectly for the lan days conventions here in the uk. The athlon 3000 setups in particular are no bigger than a wii in size and can handle esports titles without issue.
Shmerl Mar 9, 2020
https://www.techarp.com/computer/amd-graphics-roadmap-2020/
QuoteThe first AMD RDNA 2-based products are expected to launch in late 2020.

https://www.techarp.com/computer/amd-computing-roadmap-2020/
QuoteAMD plans to introduce the first processors based on its next-generation 7nm Zen 3 core in late 2020.


Last edited by Shmerl on 9 March 2020 at 4:44 pm UTC
Creak Mar 31, 2020
Quoting: aokamiI'm going to upgrade my FX-8350 for a Ryzen 7 Gen 2 as well, haha.
Would you go with a X570 motherboard ?
Well, I finally bought my new CPU: Ryzen 7 3800X (only 50$ more expensive than the 3700X).
So I went with the X570 eventually, and honestly, for now, I can't complain.
To support it, I took the Asus X570 TUF-Plus motherboard and some 16 GB of Corsair RAM @ 3600MHz.

Be careful: and I think this is true to any motherboard supporting DDR4, the base RAM clock is 2133MHz. DO NOT increase the memory frequency from the BIOS "Advanced" menu (I did that, got a permanent black screen and thought I bricked my machine), instead, use the "Ai Tweaker" menu and change the memory frequency there. I don't remember exactly but it was very simple in the end, one thing to change, like "Best frequency" or something, and it worked out-of-the-box.
slaapliedje Mar 31, 2020
Quoting: Creak
Quoting: aokamiI'm going to upgrade my FX-8350 for a Ryzen 7 Gen 2 as well, haha.
Would you go with a X570 motherboard ?
Well, I finally bought my new CPU: Ryzen 7 3800X (only 50$ more expensive than the 3700X).
So I went with the X570 eventually, and honestly, for now, I can't complain.
To support it, I took the Asus X570 TUF-Plus motherboard and some 16 GB of Corsair RAM @ 3600MHz.

Be careful: and I think this is true to any motherboard supporting DDR4, the base RAM clock is 2133MHz. DO NOT increase the memory frequency from the BIOS "Advanced" menu (I did that, got a permanent black screen and thought I bricked my machine), instead, use the "Ai Tweaker" menu and change the memory frequency there. I don't remember exactly but it was very simple in the end, one thing to change, like "Best frequency" or something, and it worked out-of-the-box.
Ha, I have been far too lazy on all my builds to bother overclocking things, my systems in general run fast enough to where I doubt I would notice. Back when I used to do it, for some reasons it always felt slower.
It is like buying third party parts for an old 302 Boss, you end up with it performing worse than the stock parts!
a0kami Mar 31, 2020
Quoting: Creak
Quoting: aokamiI'm going to upgrade my FX-8350 for a Ryzen 7 Gen 2 as well, haha.
Would you go with a X570 motherboard ?
Well, I finally bought my new CPU: Ryzen 7 3800X (only 50$ more expensive than the 3700X).
So I went with the X570 eventually, and honestly, for now, I can't complain.
To support it, I took the Asus X570 TUF-Plus motherboard and some 16 GB of Corsair RAM @ 3600MHz.

Be careful: and I think this is true to any motherboard supporting DDR4, the base RAM clock is 2133MHz. DO NOT increase the memory frequency from the BIOS "Advanced" menu (I did that, got a permanent black screen and thought I bricked my machine), instead, use the "Ai Tweaker" menu and change the memory frequency there. I don't remember exactly but it was very simple in the end, one thing to change, like "Best frequency" or something, and it worked out-of-the-box.

Hey, on my end I a 2700X with a B450 and 16 GB of ram, it was enough for my use case and it was cheap AF. :D
a0kami Mar 31, 2020
Quoting: Creak
Quoting: aokamiI'm going to upgrade my FX-8350 for a Ryzen 7 Gen 2 as well, haha.
Would you go with a X570 motherboard ?
Well, I finally bought my new CPU: Ryzen 7 3800X (only 50$ more expensive than the 3700X).
So I went with the X570 eventually, and honestly, for now, I can't complain.
To support it, I took the Asus X570 TUF-Plus motherboard and some 16 GB of Corsair RAM @ 3600MHz.

Be careful: and I think this is true to any motherboard supporting DDR4, the base RAM clock is 2133MHz. DO NOT increase the memory frequency from the BIOS "Advanced" menu (I did that, got a permanent black screen and thought I bricked my machine), instead, use the "Ai Tweaker" menu and change the memory frequency there. I don't remember exactly but it was very simple in the end, one thing to change, like "Best frequency" or something, and it worked out-of-the-box.

Hey, on my end I a 2700X with a B450 and 16 GB of ram, it was enough for my use case and it was cheap AF. :D
Creak Apr 1, 2020
Quoting: slaapliedjeHa, I have been far too lazy on all my builds to bother overclocking things, my systems in general run fast enough to where I doubt I would notice. Back when I used to do it, for some reasons it always felt slower.
It is like buying third party parts for an old 302 Boss, you end up with it performing worse than the stock parts!
Same here, but buying a 3600 MHz DDR4 RAM and only having 2133 MHz... It's almost half! I couldn't let that pass :D
tuubi Apr 1, 2020
View PC info
  • Supporter
Quoting: Creak
Quoting: slaapliedjeHa, I have been far too lazy on all my builds to bother overclocking things, my systems in general run fast enough to where I doubt I would notice. Back when I used to do it, for some reasons it always felt slower.
It is like buying third party parts for an old 302 Boss, you end up with it performing worse than the stock parts!
Same here, but buying a 3600 MHz DDR4 RAM and only having 2133 MHz... It's almost half! I couldn't let that pass :D
I found the whole process of setting my RAM to run at the advertised frequency and latencies on my Asus Prime X470-Pro more than a bit unintuitive. Why does every brand have their own "cool" names for this stuff? "AI Tweaker" and "AI Overclock Tuner" my ass.

Like you, I found the correct setting only after wasting some time fiddling with manual configuration. One reason for this is that I didn't know D.O.C.P is the AMD equivalent for Intel's XMP, this being my first AMD setup in years. Another was me thinking that as I was just trying to configure my hardware to match the spec on the label, whyever would I want to enable these fancy sounding overclocking features?

Rant over. Sorry.
Creak Apr 4, 2020
Yep, got the same issue with XMP and DOCP. I didn't know it exists, and almost bricked my brand new mobo by trying to tweak the settings manually.

But once I found XMP and DOCP, it was basically a matter of enabling one setting and that's it ;)
While you're here, please consider supporting GamingOnLinux on:

Reward Tiers: Patreon. Plain Donations: PayPal.

This ensures all of our main content remains totally free for everyone! Patreon supporters can also remove all adverts and sponsors! Supporting us helps bring good, fresh content. Without your continued support, we simply could not continue!

You can find even more ways to support us on this dedicated page any time. If you already are, thank you!
The comments on this article are closed.