Check out our Monthly Survey Page to see what our users are running.

Epic's HTML5 Citadel demo runs on all platforms

Posted by SimmyD, | Views: 3,669
Epic Games have released a new webGL demo that’s running great under Firefox on Linux. Would be interest to see Epic release a full browser game like this in the future, it means more platforms would be able to play it that's for sure.

Had it running on my work machine running FC18 with onboard Intel chip not a problem.

Check it out at http://www.unrealengine.com/html5 Article taken from GamingOnLinux.com.
0 Likes
We do often include affiliate links to earn us some pennies. We are currently affiliated with GOG, Humble Store and Paradox Interactive. See more information here.
The comments on this article are closed.
Liam Dawe 6 May 2013 at 10:02 am UTC
I cleaned it up, added a pic and a bit more text and approved, it's interesting but sadly won't load for me!
SimmyD 6 May 2013 at 11:17 am UTC
Thanks liamdawe,  More wanted to let you know about it so you can post it Thanks for the clean up!  loving your work on the site too!
SimmyD 6 May 2013 at 11:20 am UTC
Just tested it on Fedora 18 with nvidia blob drivers and firefox 20 from the fedora repo and its working great
Anonymous 6 May 2013 at 3:34 pm UTC
Worked fine with r600g as well.
Mike Frett 6 May 2013 at 4:27 pm UTC
Running great on AMD 6670, Xubuntu 12.04 and Firefox 20. The nightlys are more optimized though.
Speedster 6 May 2013 at 5:28 pm UTC
Running Enterprise firefox on this laptop which is old enough the demo told me to get a new browser. Definitely want to give this a try on my desktop...
KIAaze 6 May 2013 at 6:15 pm UTC
QuoteBenchmark results:
Average FPS: 16.6
Resolution: 1440x900
Performance level: High performance
Not bad. In fact, I would say it works even better than the Valve Source games on my PC!

I tried Portal yesterday, and get the same problems as with Team fortress 2 and Counter-Strike:Source:
It looks nice and seems to be fluid sometimes, but every few seconds (or every second), it lags a bit and the sound stutters.

Note: Posting CLI output on this forum is still not very nice. I had to deal with interpreted [\size=] statements from lspci and there is no scrollbar, making this take up a lot of space.
I think [code/verbatim] tags could be quite useful... ;)

Quote$ sudo lspci -vvnn
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RS690 Host Bridge [1002:7911]
       Subsystem: Giga-byte Technology Device [1458:5000]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
       Latency: 32

00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) [1002:7913] (prog-if 00 [Normal decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 4 bytes
       Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
       I/O behind bridge: 0000e000-0000efff
       Memory behind bridge: fdf00000-fdffffff
       Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
       BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
       Capabilities: [50] Power Management version 3
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                       ExtTag+ RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 128 bytes, MaxReadReq 128 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
                       ClockPM- Surprise- LLActRep+ BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                       Slot #2, PowerLimit 75.000W; Interlock- NoCompl-
               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                       Control: AttnInd Off, PwrInd Off, Power- Interlock-
               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                       Changed: MRL- PresDet+ LinkState-
               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
               RootCap: CRSVisible-
               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
       Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
               Address: 00000000  Data: 0000
       Capabilities: [b0] Subsystem: Giga-byte Technology Device [1458:5000]
       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
       Capabilities: [100 v3] #1002
       Kernel driver in use: pcieport
       Kernel modules: shpchp

00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] (prog-if 00 [Normal decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 4 bytes
       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
       I/O behind bridge: 0000d000-0000dfff
       Memory behind bridge: fde00000-fdefffff
       Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
       BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
       Capabilities: [50] Power Management version 3
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                       ExtTag+ RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 128 bytes, MaxReadReq 128 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
               LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
                       ClockPM- Surprise- LLActRep+ BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                       Slot #6, PowerLimit 25.000W; Interlock- NoCompl-
               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                       Control: AttnInd Off, PwrInd Off, Power- Interlock-
               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                       Changed: MRL- PresDet+ LinkState-
               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
               RootCap: CRSVisible-
               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
       Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
               Address: 00000000  Data: 0000
       Capabilities: [b0] Subsystem: Giga-byte Technology Device [1458:5000]
       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
       Capabilities: [100 v6] #1002
       Kernel driver in use: pcieport
       Kernel modules: shpchp

00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
       Subsystem: Giga-byte Technology Device [1458:b002]
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32
       Interrupt: pin A routed to IRQ 22
       Region 0: I/O ports at ff00 [\size=8]
       Region 1: I/O ports at fe00 [\size=4]
       Region 2: I/O ports at fd00 [\size=8]
       Region 3: I/O ports at fc00 [\size=4]
       Region 4: I/O ports at fb00 [\size=16]
       Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [\size=1K]
       Capabilities: [60] Power Management version 2
               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [70] SATA HBA v1.0 InCfgSpace
       Kernel driver in use: ahci
       Kernel modules: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
       Subsystem: Giga-byte Technology Device [1458:5004]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32, Cache Line Size: 4 bytes
       Interrupt: pin A routed to IRQ 16
       Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [\size=4K]
       Kernel driver in use: ohci_hcd

00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
       Subsystem: Giga-byte Technology Device [1458:5004]
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32, Cache Line Size: 4 bytes
       Interrupt: pin A routed to IRQ 16
       Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [\size=4K]
       Kernel driver in use: ohci_hcd

00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
       Subsystem: Giga-byte Technology Device [1458:5004]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32, Cache Line Size: 4 bytes
       Interrupt: pin B routed to IRQ 17
       Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [\size=256]
       Capabilities: [c0] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
               Bridge: PM- B3+
       Capabilities: [e4] Debug port: BAR=1 offset=00e0
       Kernel driver in use: ehci_hcd

00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
       Subsystem: Giga-byte Technology Device [1458:5004]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32, Cache Line Size: 4 bytes
       Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [\size=4K]
       Kernel driver in use: ohci_hcd

00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
       Subsystem: Giga-byte Technology Device [1458:5004]
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32, Cache Line Size: 4 bytes
       Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [\size=4K]
       Kernel driver in use: ohci_hcd

00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
       Subsystem: Giga-byte Technology Device [1458:5004]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32, Cache Line Size: 4 bytes
       Interrupt: pin B routed to IRQ 19
       Region 0: Memory at fe029000 (32-bit, non-prefetchable) [\size=256]
       Capabilities: [c0] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
               Bridge: PM- B3+
       Capabilities: [e4] Debug port: BAR=1 offset=00e0
       Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a)
       Subsystem: Giga-byte Technology GA-MA770-DS3rev2.0 Motherboard [1458:4385]
       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
       Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
       Kernel driver in use: piix4_smbus
       Kernel modules: sp5100_tco, i2c-piix4

00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
       Subsystem: Giga-byte Technology Device [1458:5002]
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32
       Interrupt: pin A routed to IRQ 16
       Region 0: I/O ports at 01f0 [\size=8]
       Region 1: I/O ports at 03f4 [\size=1]
       Region 2: I/O ports at 0170 [\size=8]
       Region 3: I/O ports at 0374 [\size=1]
       Region 4: I/O ports at fa00 [\size=16]
       Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
               Address: 00000000  Data: 0000
       Kernel driver in use: pata_atiixp
       Kernel modules: pata_atiixp

00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383]
       Subsystem: Giga-byte Technology Device [1458:a002]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32, Cache Line Size: 4 bytes
       Interrupt: pin A routed to IRQ 16
       Region 0: Memory at fe024000 (64-bit, non-prefetchable) [\size=16K]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Kernel driver in use: snd_hda_intel
       Kernel modules: snd-hda-intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
       Subsystem: Giga-byte Technology Device [1458:5001]
       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 64
       Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
       I/O behind bridge: 0000c000-0000cfff
       Memory behind bridge: fdd00000-fddfffff
       Prefetchable memory behind bridge: fdc00000-fdcfffff
       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
       BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
       Subsystem: Giga-byte Technology Device [1458:5004]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32, Cache Line Size: 4 bytes
       Interrupt: pin C routed to IRQ 18
       Region 0: Memory at fe028000 (32-bit, non-prefetchable) [\size=4K]
       Kernel driver in use: ohci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Capabilities: [80] HyperTransport: Host or Secondary Interface
               Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
               Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
               Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
               Revision ID: 3.00
               Link Frequency: 1.0GHz
               Link Error: <Prot- <Ovfl- <EOC- CTLTm-
               Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
               Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Kernel modules: amd64_edac_mod

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Capabilities: [f0] Secure device <?>
       Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV710 [Radeon HD 4350] [1002:954f] (prog-if 00 [VGA controller])
       Subsystem: PC Partner Limited Device [174b:174b]
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 4 bytes
       Interrupt: pin A routed to IRQ 41
       Region 0: Memory at d0000000 (64-bit, prefetchable) [\size=256M]
       Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [\size=64K]
       Region 4: I/O ports at ee00 [\size=256]
       [virtual] Expansion ROM at fdf00000 [disabled] [\size=128K]
       Capabilities: [50] Power Management version 3
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 128 bytes, MaxReadReq 128 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
                       ClockPM- Surprise- LLActRep- BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
               DevCap2: Completion Timeout: Not Supported, TimeoutDis-
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
                        Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                        Compliance De-emphasis: -6dB
               LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                        EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
               Address: 00000000fee0f00c  Data: 4169
       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
       Kernel driver in use: radeon
       Kernel modules: radeon

01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] [1002:aa38]
       Subsystem: PC Partner Limited R700 Audio Device [Radeon HD 4000 Series] [174b:aa38]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 4 bytes
       Interrupt: pin B routed to IRQ 42
       Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [\size=16K]
       Capabilities: [50] Power Management version 3
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 128 bytes, MaxReadReq 128 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
                       ClockPM- Surprise- LLActRep- BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
               DevCap2: Completion Timeout: Not Supported, TimeoutDis-
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
                        Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                        Compliance De-emphasis: -6dB
               LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                        EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
               Address: 00000000fee0f00c  Data: 4179
       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
       Kernel driver in use: snd_hda_intel
       Kernel modules: snd-hda-intel

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
       Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard [1458:e000]
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 4 bytes
       Interrupt: pin A routed to IRQ 40
       Region 0: I/O ports at de00 [\size=256]
       Region 2: Memory at fdbff000 (64-bit, prefetchable) [\size=4K]
       Region 4: Memory at fdbe0000 (64-bit, prefetchable) [\size=64K]
       [virtual] Expansion ROM at fdb00000 [disabled] [\size=64K]
       Capabilities: [40] Power Management version 3
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
               Address: 00000000fee0f00c  Data: 4161
       Capabilities: [70] Express (v1) Endpoint, MSI 01
               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <8us
                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                       MaxPayload 128 bytes, MaxReadReq 4096 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
                       ClockPM+ Surprise- LLActRep- BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
       Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
               Vector table: BAR=4 offset=00000000
               PBA: BAR=4 offset=00000800
       Capabilities: [d0] Vital Product Data
               Unknown small resource type 00, will not decode more.
       Capabilities: [100 v1] Advanced Error Reporting
               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
       Capabilities: [140 v1] Virtual Channel
               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
               Arb:    Fixed- WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                       Status: NegoPending- InProgress-
       Capabilities: [160 v1] Device Serial Number 12-34-56-78-12-34-56-78
       Kernel driver in use: r8169
       Kernel modules: r8169

03:06.0 Network controller [0280]: Ralink corp. RT2561/RT61 802.11g PCI [1814:0301]
       Subsystem: Ralink corp. EW-7108PCg/EW-7128g [1814:2561]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32, Cache Line Size: 4 bytes
       Interrupt: pin A routed to IRQ 20
       Region 0: Memory at fddf8000 (32-bit, non-prefetchable) [\size=32K]
       Capabilities: [40] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Kernel driver in use: rt61pci
       Kernel modules: rt61pci
While you're here, please consider supporting GamingOnLinux on Patreon, Liberapay or Paypal. We have no adverts, no paywalls, no timed exclusive articles. Just good, fresh content. Without your continued support, we simply could not continue!

You can find even more ways to support us on this dedicated page any time. If you already are, thank you!
Livestreams & Videos
None currently, submit yours here!
See more!
Popular this week
View by Category
Contact
Latest Comments
Latest Forum Posts