You can sign up to get a daily email of our articles, see the Mailing List page!
Nearly at 4,5 Ghz on the Ryzen 9
entropie commented on 22 July 2019 at 10:55 pm UTC

Benchmarked it with SciMark for Single and FFTE for Multithread max frequencies. In lack of the k10temp, I have choosen the fan speed as a measurement. Highest temperature of 80° would be 3600 rpm:

So far those CPUs seem to perform very well on Linux. The temps are way lower than on my R7 2700X, its stable idling at 40° and I can get easily in the 4,5 Ghz range on liquorix kernel. So with new Agesa drivers the 4,6 ghz comes closer .

In the test nothing is OC'ed, except for the RAM @ 3200 Mhz.

chancho_zombie commented on 20 August 2019 at 8:13 am UTC

I found this quite interesting article on reddit, I don't know what's the case with Zen 2 but this guy (an experienced overclocker from hwbot) measured what are the temps and voltages where Zen+ starts to see some degradation.

Apparently, in the case of Zen+, if the max temp goes above 58ª C (under common load), and the voltage above 1.375 then your CPU is going to degrade a lot faster.

You need to Register and Login to comment, submit articles and more.

Or login with...

Livestreams & Videos
Community Livestreams
See more!
Popular this week
View by Category
Latest Comments
Latest Forum Posts