Check out what anti-cheat enabled games work on Linux / SteamOS on our dedicated anti-cheat compatibility page.
We use affiliate links to earn us some pennies. Learn more.

As a bit of a PSA - you might want to ensure you're rather careful with Valve's new Steam Controller charging Puck. Keep anything conductive away from it.

There's a pretty big Reddit post that's appeared from user Toikka, who notes they accidentally left a metallic smartwatch strap laying around that went on top of the Steam Controller charging Puck and started "sizzling" that "Almost started a fire". Which…does not sound like something that's particularly safe. However, to be clear here, part of the issue is that this particular strap was attached to a watch that was actually on charge. So there was some cross-over happening here.

Picture the Redditor showed below:

I'm sure to some that this might seem like a "well, duh" moment. Don't leave things laying around chargers. Especially if they're also on charge. But, we're human, and humans can be pretty stupid or just generally clumsy. We also have children, pets and — you get the idea, accidents can definitely happen so this seems like something worth being clear about regardless.

As for overall safety - Valve are likely not the only hardware vendor to have this issue, as there's quite a few controllers out there that have a similar sort of charging pin system (like the 8BitDo Ultimate series).

Luckily, I still had the Steam Controller box and manual left here. So I dug into the manual, and Valve do actually have a small and pretty clear safety notice on this:

But, who actually reads this kind of small-print? My bet is only a very tiny minority of people, especially for something usually as simple as a game controller. Ideally, Valve should look to add a much more prominent warning (like in the Steam client) - just to be a bit more on the safe side.

I've emailed Valve to provide a comment on the safety of it and will update if they reply.

Article taken from GamingOnLinux.com.
13 Likes
About the author -
author picture
I am the owner of GamingOnLinux. After discovering Linux back in the days of Mandrake in 2003, I constantly checked on the progress of Linux until Ubuntu appeared on the scene and it helped me to really love it. You can reach me easily by emailing GamingOnLinux directly. You can follow me personally on Mastodon [External Link].
See more from me
All posts need to follow our rules. Please hit the Report Flag icon on any post that breaks the rules or contains illegal / harmful content. Readers can also email us for any issues or concerns.
14 comments

syylk 6 hours ago
Tbh, live charging connectors should be sockets, not prods, to reduce the chance of involuntary short-circuits.
Bumadar 6 hours ago
User Avatar
But, who actually reads this kind of small-print? My bet is only a very tiny minority of people, especially for something usually as simple as a game controller. Ideally, Valve should look to add a much more prominent warning (like in the Steam client) - just to be a bit more on the safe side.
Oh please, take responsibility, its magnetic, it has electricity......
Liam Squires-Hand 6 hours ago
User Avatar
Quoting: Bumadar
But, who actually reads this kind of small-print? My bet is only a very tiny minority of people, especially for something usually as simple as a game controller. Ideally, Valve should look to add a much more prominent warning (like in the Steam client) - just to be a bit more on the safe side.
Oh please, take responsibility, its magnetic, it has electricity......
I think you vastly overestimate how many people understand that at all.
Klaas 5 hours ago
User Avatar
It is bad design to have exposed pins that carry a current. Even if they are not magnetic. There is always a risk that something conductive falls on top of it and starts a fire.
Cley_Faye 5 hours ago
User Avatar
I'm surprised that this can happen. These being pins is an issue, but at some point they have to expose some contacts. What worries me is that it seems that this is more or less a passthrough from the power source, and there's no current limit or any other safety feature.

It's hard to say from pictures, but that metal strap seems to have been quite conductive. There should be some safety shutdown when a short is detected across the pins.

I wonder if there's some extra details we're not aware of, or if it really is that "dumb".
tfk 5 hours ago
I had something like this happen to my PS4 dualshock controller when I put it in the microwave to dry after cleaning.
mindedie 5 hours ago
User Avatar
Quoting: KlaasIt is bad design to have exposed pins that carry a current.
All external battery chargers/dock (for cylindrical, prismatic, random battery packs and whole devices) have exposed pins. Sound way to close to alarmist BS...

Quoting: Cley_FayeIt's hard to say from pictures, but that metal strap seems to have been quite conductive. There should be some safety shutdown when a short is detected across the pins.
Puck it self just connector/plug like barrel jack or any other? All "intelligence" are in charging bricks. Good stuff have all safety features: shorts, wrong polarity, current surge protection etc. More important what was connected to other end of Puck... PC/laptop and similar USB port are low power, except USB C power delivery ones.

Last edited by mindedie on 22 May 2026 at 4:42 pm UTC
Klaas 4 hours ago
User Avatar
Quoting: mindedieAll external battery chargers/dock (for cylindrical, prismatic, random battery packs and whole devices) have exposed pins.
No, they don't. There are some, but most that have exposed conductive surfaces only have ground connections on the outside. Take a look at the cylindrical connectors of olden times (okay this one can have the positive on the outside depending on polarity), all types of USB-plugs, Molex, the power part of SATA, etc. are safer by design.

This is pure laziness. Even if you limit the current (which obviously you should) you have to assume as a designer that that mechanism can fail (and it will wither by aging or by production error).
mindedie 4 hours ago
User Avatar
Quoting: Klaas
Quoting: mindedieAll external battery chargers/dock (for cylindrical, prismatic, random battery packs and whole devices) have exposed pins.
No, they don't.
Charging BL-5C batteries, right now, dock/slot pins are nice and exposed. Looking at camera pack, AA, AAA, 18650, 21600, 6LR61 chargers... kinda same, exposed. If shorting pins with something conductive, charging brick (stops) start blinking for errors...
Molex... try using (detachable) molex cables from one manufacture PSU on different manufacture or even same manufacture, just different model.
vic-bay 3 hours ago
keep your room tidy, pay attention to your electric equipment and nothing bad will ever happen, unless a cat or a mouse chews on wires.
Mohandevir 2 hours ago
Still waiting on my may 9th reservation to be processed while others are doing silly stuff like this... Come on! 😁
Caldathras 2 hours ago
Quoting: vic-baykeep your room tidy, pay attention to your electric equipment and nothing bad will ever happen, unless a cat or a mouse chews on wires.
Or a rabbit, LoL. Long, long ago my girlfriend's dwarf bunny chewed partially through the monitor cable while I was using the computer. The screen went from full colour to shades of green. The rabbit survived. She changed his name to Merlin.

Merlin liked to play with my brother's Siamese cat. He would sneak up behind the cat and bite its tail then run away, expecting to be chased.

Last edited by Caldathras on 22 May 2026 at 6:45 pm UTC
Philadelphus 1 hour ago
However, to be clear here, part of the issue is that this particular strap was attached to a watch that was actually on charge. So there was some cross-over happening here.
The strap has to be electrically isolated from the internals of the watch, so whether the watch was charging or not shouldn't have a bearing on causing a short with the puck. (Though that likely would've exacerbated a potential fire, for sure.)

We can debate the hardware design, but what's done is done at this point. I wonder if Valve can update the puck's firmware to detect shorts and cut the current.
Kandarihu 1 hour ago
The only foreign metallic item that ever came across my puck was a staple. It made contact with one pin, not two. I'll have to be careful about this from now on. There's a hazard of aluminium can tabs in the same area as the puck.
While you're here, please consider supporting GamingOnLinux on:

Reward Tiers: Patreon Logo Patreon. Plain Donations: PayPal Logo PayPal.

This ensures all of our main content remains totally free for everyone! Patreon supporters can also remove all adverts and sponsors! Supporting us helps bring good, fresh content. Without your continued support, we simply could not continue!

You can find even more ways to support us on this dedicated page any time. If you already are, thank you!
Login / Register