While you're here, please consider supporting GamingOnLinux on:
Reward Tiers: Patreon. Plain Donations: PayPal.
This ensures all of our main content remains totally free for everyone! Patreon supporters can also remove all adverts and sponsors! Supporting us helps bring good, fresh content. Without your continued support, we simply could not continue!
You can find even more ways to support us on this dedicated page any time. If you already are, thank you!
Reward Tiers: Patreon. Plain Donations: PayPal.
This ensures all of our main content remains totally free for everyone! Patreon supporters can also remove all adverts and sponsors! Supporting us helps bring good, fresh content. Without your continued support, we simply could not continue!
You can find even more ways to support us on this dedicated page any time. If you already are, thank you!
Login / Register
- Proton 9.0 (Beta16) brings more regression fixes, updated Steamworks SDK
- Windows compatibility layer Wine 9.5 released
- Orange Pi Neo Linux gaming handheld starts at $499 with Ryzen 7840U, Ryzen 8840U at $599
- Nova, a Rust-based Linux driver for NVIDIA GPUs announced
- Ubuntu 24.04 increases vm.max_map_count for smoother Linux gaming
- > See more over 30 days here
-
Oh Snap! Canonical now doing manual reviews for new pac…
- hardpenguin -
PUNKCAKE Délicieux just added Linux support to a whole…
- hardpenguin -
EA anticheat arrives for Battlefield V in April, will b…
- preludelinux -
Oh Snap! Canonical now doing manual reviews for new pac…
- BlackBloodRum -
Oh Snap! Canonical now doing manual reviews for new pac…
- CyborgZeta - > See more comments
Latest Forum Posts
as a passioned linux user I’m wondering what would be the most linuxy ethernet switch out there?
I’m willing to pay a bit more for the good thing and supporting open source/free software. Also I’m clearly an victim of hardware for enthusiasms. Therefore featurewise NBase-T (2,5/5 gbit) are in scope. Nice to have would be the option of creating bonds and managing vlans. On the other hand i do not need more than 8 ports as i just have 5-6 devices connected via cable based lan. So 16 ports seems to be an upper limit.
Using a dedicated classical x86 pc with a lot of networkcards is not what I’m looking for. But I am always open regarding using raspis. At the end i want to have a plug’n’play usbale switch.
Minimal objective: At least i would like to buy a product from a really linux friendly company. Best would be to know linux friendliest network hardware provider.
Any suggestions? What are you using? Any further thoughts?
View PC info
I am a fan of the UniFi networking hardware and software. While I don't have enough knowledge of their background to say whether or not they're pro Linux, you can SSH into their devices and you can run their web UI on a Linux host. Also, you do not have to create any accounts or register your devices in order to download updates (as opposed to the annoying Cisco company). However, I am not sure that they offer the higher speeds you're looking for. Be prepared to spend >$1,000 for those speeds.
I recently set up a small office with a 24-port Netgear switch. Each port was capable of 10G. So many products offer browser-based user interfaces these days that you're not going to be spending time on a command line unless you're managing many devices at scale.
Personally, I use a cheap TP-link AC1750 running DD-Wrt and it' working great
View PC info
The initial question has some kind of morale component. I would like to buy from a company dedicated to free and open software. Also I would prefer an as open as possible hardware.
No mentioned, but usually I try to buy products that have been manufactured under fair conditions. Sustainability is also a factor.
And I’m willing to pay more if those ethical standards are met.