While you're here, please consider supporting GamingOnLinux on:
Reward Tiers:
Patreon. Plain Donations:
PayPal.
This ensures all of our main content remains totally free for everyone! Patreon supporters can also remove all adverts and sponsors! Supporting us helps bring good, fresh content. Without your continued support, we simply could not continue!
You can find even more ways to support us on this dedicated page any time. If you already are, thank you!
Reward Tiers:
This ensures all of our main content remains totally free for everyone! Patreon supporters can also remove all adverts and sponsors! Supporting us helps bring good, fresh content. Without your continued support, we simply could not continue!
You can find even more ways to support us on this dedicated page any time. If you already are, thank you!
Login / Register
- Oh dear - ARC Raiders was logging your private Discord chats [updated]
- Many more US states are planning or already have operating system age verification laws
- Xbox "Project Helix" confirmed to run Xbox and PC games - competition for the Steam Machine
- Transport Fever 3 confirmed for Linux and macOS support
- Slay the Spire 2 is out now in Early Access with online co-op
- > See more over 30 days here
Recently Updated
- Recommendations for portable monitor for Steam Deck?
- childermass - Shop Crush - Psychological Horror Thrift Sim with Literal Illusio…
- hollowlimb - Introduce Yourself!
- hollowlimb - Proton/Wine Games Locking Up
- Caldathras - recently released super fun crpg - Sector Unknown
- Jarmer - See more posts
How to setup OpenMW for modern Morrowind on Linux / SteamOS and Steam Deck
How to install Hollow Knight: Silksong mods on Linux, SteamOS and Steam Deck
Just received my new Ryzen bundled with a Wraith Prism cooler and I'm asking myself if I should stick with this one or should I re-use the Cryorig H5 universal that is actually in my current computer.
H5 universal is advertised as 160w TDP, can't find the info for the wraith.
So, H5 or Wraith ? Thanks for your help.
Last edited by Shmerl on 29 Dec 2019 at 3:46 am UTC
@Shmerl Same as yours. I bought the H5 universal and not the NH-D15 at the time for one reason, the 5 mm height difference.
The cryorig barely allow me to put my side panel back in place so the Noctua is not an option. I could change my case, sure, but I've spent years customizing it with various stickers so I grew fond of it and I know it can still hold this fourth configuration swap.
Build time is coming, hope everything will go smooth, fingers crossed.
Last edited by Shmerl on 29 Dec 2019 at 9:30 am UTC
After one hour looking for the box of the H5 to get the AMD backplate, I discovered that this cooler bought 2 years ago didn't come with an AM4 kit and after a quick search found out that it's not backward compatible with AM3+ and, icing on the cake, Cryorig discontinued their program for free AM4 upgrade kit. Bummer...
Concerning the cooler, it's pretty silent and efficient, RGB grew on me and as Aquabat stated is sufficient for now.
Cheers
The major plus of the case was 200 mm fans support for me on the top and front (I put one 140 mm Noctua for exhaust on the back and two 200 mm Noctua for intake on top and front in it, and they are very silent). It's pretty hard to find any recent cases like that, which also have simple surfaces for custom dust filters. If you need those, check [Demciflex](https://www.demcifilter.com), I ordered them for that CM case, and they work very well.
With Noctua case fans, make sure to use their rubber connectors instead of fan screws, that reduces vibration noise quite a bit. Also, the top fan holes in that Cosmos II case don't align with 200 mm Noctua fan, but rubber connectors are flexible, so that works around the issue fine (with screws it simply won't work, unless you'll drill holes in the case).
Last edited by Shmerl on 30 Dec 2019 at 9:07 pm UTC